28U Intergrated Outdoor Power Cabinet With Rectifier System UPS Battery Energy Storage Enclosure
Propriedades Básicas
Local de Origem:
Shenzhen, China (continente)
Marca:
ESTEL
Certificação:
ISO9001, CE, 3C, FCC, TLC, IP55
Propriedades comerciais
Quantidade mínima de pedido:
1 conjunto
Preço:
715-4286 usd
Condições de pagamento:
T/T, L/C, D/A, Western Union, Paypal, etc.
Capacidade de fornecimento:
5, 000 conjuntos por mês
PRODUTOS RELACIONADOS
-
28U Gabinete de energia exterior integrado com sistema de retificação UPS Bateria armazenamento de energia
28U Intergrated Outdoor Power Cabinet With Rectifier System UPS Battery Energy Storage 1. Brief introduction: Outdoor telecom cabinets typically come with a range of features to ensure the protection and functionality of the telecom equipment. Some common features of outdoor telecom cabinets include... -
Armário de poder exterior, armário exterior das telecomunicações com sensor da água/sensor da porta
Outdoor Power Cabinet, Outdoor Telecom Cabinet With Water Sensor / Door Sensor 1. Description The cabinet is one compartment cabinet. The cabinet cooling use air conditioner and heat exchanger, to ensure the equipments operate normally at stable temperature range, so as to make the service life of ... -
Proteção exterior do ingresso do armário IP55 das telecomunicações do controle de temperatura com soquete do gerador
Temperature Control Outdoor Power Cabinet / Outdoor Telecom Cabinet With Generator Socket 1. Specifications (1) Technical Parameters Ingress Protection: IP55 Grade B Lightning Proof: Nominal: 60KA, Max.: 100KA Temperature: Working Temperature: -40°C ~ +55°C Storage Temperature: -50°C ~ + 70°C ... -
Painel exterior IP55 da estrutura do sanduíche do armário de poder de Emerson Rectifier/bateria
Sandwich Structure Panel Outdoor Power Supply Cabinet With Emerson Rectifier and Battery 1 Product description 1.1 Appearance After the cabinet is installed, as shown in Figure 1 and Figure 2 Figure 1 Figure 2 1.2 Cabinet configuration The outdoor integrated cabinet configuration of this project is ...
